Manuals / East Mfg Parts Book.pdf
EAST MFG · CST20W
East Mfg Parts Book.pdf
- Pages
- 12
- Parts
- 35
Assemblies
FRAME ASSEMBLYAIR SYSTEMELECTRICAL SYSTEMAXLE ASSEMBLY
Parts
35 of 35 parts
| Item | Part No. | Description | Section | Qty |
|---|---|---|---|---|
| 1 | 2809 | Eye, Sliding Drawbar, 45 Deg. Mtg | FRAME ASSEMBLY | — |
| 2 | 14280 | Eye, Drawbar Weldment, 76” DWB, CSL | FRAME ASSEMBLY | — |
| 4 | 14699 | Tailplate Kit, Weld-On Counterweight | FRAME ASSEMBLY | — |
| 5 | 14860 | Hook Clevis, 5 Ton W/ Safety Latch | FRAME ASSEMBLY | — |
| 6 | 1351 | Chain Anchor, 3/4” for 1/2” Chain | FRAME ASSEMBLY | — |
| 7 | 12419 | Safety Chain 1/2” X 20”, GR70 | FRAME ASSEMBLY | — |
| 8 | 13049 | Basket, Expanded, Metal | FRAME ASSEMBLY | — |
| 9 | 12159 | Stiff Leg Wldmt, 34HH | FRAME ASSEMBLY | — |
| N/S | 12082 | Susp Hutch H9700 S FL/MT/WO 7/8 5 3/4 | FRAME ASSEMBLY | — |
| N/S | 12654 | Installation, Flap Hangers CSL | FRAME ASSEMBLY | — |
| N/S | 12778 | Flap 24WX33L 45 Deg LH Anti-Spray W/Logo | FRAME ASSEMBLY | — |
| N/S | 12779 | Flap 24WX33L 45 Deg RH Anti-Spray W/Logo | FRAME ASSEMBLY | — |
| 1 | 2414 | Air Reservoir Assy | AIR SYSTEM | — |
| 2 | 1278 | Valve, Push-Pull, PP-1 | AIR SYSTEM | — |
| 3 | 13738 | Valve, Relay/ABS Control Meritor/WABCO, PLC | AIR SYSTEM | — |
| 4 | 10748 | Valve, Check, 90 Deg Style | AIR SYSTEM | — |
| 5 | 9857 | Valve, Control Line | AIR SYSTEM | — |
| 6 | 12582 | Valve, Pressure Protection | AIR SYSTEM | — |
| 7 | 9858 | Valve, Emergeny Control | AIR SYSTEM | — |
| 8 | 5855 | Glandhand, Emergency, W/Full Face Red Seal | AIR SYSTEM | — |
| 9 | 5854 | Glandhand, Service, W/Full Face Blue Seal | AIR SYSTEM | — |
| 10 | 14926 | Hose, Air, 3/8 X 92, Rubber, 3/8 X 1/2 Conn | AIR SYSTEM | — |
| 11 | 11222 | Hose, Air, 3/8 X 37, Rubber, 3/8 X3/8 Conn | AIR SYSTEM | — |
| NS | 1775 | Valve, Drain, Lever | AIR SYSTEM | — |
| 1 | 10319 | Cable 7-Way Straight 10’ W/Plugs ABS | ELECTRICAL SYSTEM | — |
| 1 | 104-4-02700 | 5TH Wheel Simplex Lite LH Release | ELECTRICAL SYSTEM | — |
| 2 | 12514 | Harness ABS, 2-Socket, 2-Light | ELECTRICAL SYSTEM | — |
| 3 | 9562 | Lens, Amber, Trucklite, ABS | ELECTRICAL SYSTEM | — |
| 4 | 9563 | Grommet, Lamp, Trucklite, | ELECTRICAL SYSTEM | — |
| 5 | 2508 | Lamp, Red, Grote, (Lamp Only) | ELECTRICAL SYSTEM | — |
| 6 | 2509 | Grommet, Lamp, Grote | ELECTRICAL SYSTEM | — |
| 7 | 2652 | Capscrew, 5/16-18 UNC X 1-1/4, HX, GR 5, PTD | ELECTRICAL SYSTEM | — |
| 8 | 1646 | Nut, 5/16-18 UNC, NYL INS, HEX, PTD | ELECTRICAL SYSTEM | — |
| 9 | 1454 | Washer, 5/16, SAE, PTD FIFTHWHEEL | ELECTRICAL SYSTEM | — |
| N/S | 15544W | Axle Assy 71.5 Cast A5.5M ABS 5/8 Wall | AXLE ASSEMBLY | — |
Service Procedures
1. Coupling · COUPLING
Make sure jaw is locked open and trailer is at
1. Uncoupling · COUPLING
With vehicle at rest in a relaxed condition
1. JAW REMOVAL AND REPLACEMENT ON TRACTOR · REMOVAL
Lock the jaw mechanism using a bar or block.
1. JAW REMOVAL AND REPLACEMENT ON TRACTOR · REMOVAL
Clean and lubricate the fifth wheel plate jaw
1. Kingpin Clearance Adjustment” · ADJUSTMENT
ALWAYS recheck using a gauge to assure
2. JAW REMOVAL AND REPLACEMENT ON TRACTOR · REMOVAL
Remove the clinch pin
2. Kingpin Clearance Adjustment” · ADJUSTMENT
Remember to secure the jaw pin by installing
2. Coupling · COUPLING
Back dolly slowly under trailer until jaw locks
2. Uncoupling · COUPLING
Pull dolly slowly out from under the trailer.
2. JAW REMOVAL AND REPLACEMENT ON TRACTOR · REMOVAL
Reassemble the parts in the reverse order of
3. Kingpin Clearance Adjustment” · ADJUSTMENT
PositionIncrementalCumulative
3. JAW REMOVAL AND REPLACEMENT ON TRACTOR · REMOVAL
Slide the jaw away from the lock and remove
3. JAW REMOVAL AND REPLACEMENT ON TRACTOR · REMOVAL
Reinstall the clinch pin.
3. Uncoupling · COUPLING
If the handle will not pull outward when the vehicle
4. JAW REMOVAL AND REPLACEMENT ON TRACTOR · REMOVAL
Perform Steps 1 through 3 in the section“Jaw/
4. Kingpin Clearance Adjustment” · ADJUSTMENT
BRACKET CONNECTION
5. Kingpin Clearance Adjustment” · ADJUSTMENT
BRACKET PAD REPLACEMENT